View Categories

Luxafor Bluetooth manual

The Luxafor Bluetooth is a busy light that works without a cable to your computer. The Dot is the light. It plugs into the Power Bank, which gives it power and holds it in place. A small USB dongle connects the Dot to your computer, or you can control it from an Android phone. This manual covers charging, setup, the Luxafor desktop app, battery life, specifications and troubleshooting.

Luxafor Bluetooth with the Dot and the dongle glowing red

What’s in the box #

Luxafor Dot, Power Bank, dongle and charging cable

  • 1 Luxafor Dot
  • 1 Luxafor Power Bank
  • 1 Luxafor dongle
  • 1 USB charging cable

Charge the Power Bank #

  1. Plug the charging cable into a USB wall charger.
  2. Plug the other end into the micro USB port on the Power Bank.
  3. Wait until the light turns solid red. Charging takes about 3 to 5 hours.

The charging light is behind the magnet. You can see it best in the dark. It blinks red while the Power Bank charges and turns solid red when it is full.

Do not charge the Power Bank from a computer USB port. It charges much slower there and uses more energy. If you do not use the Power Bank for a long time, charge it fully every 3 months. This keeps the battery from draining too far and getting damaged.

Set up #

You can control the Luxafor Bluetooth from a computer or from an Android phone.

Connect to a computer #

  1. Download the Luxafor desktop app for your computer from the Luxafor software page. Install the latest version.
  2. Charge the Power Bank fully.
  3. Plug the Dot into the Power Bank. Always do this before you plug the dongle into the computer.
  4. Peel the plastic off the double-sided tape on the magnet. Stick the magnet on a smooth, clean surface where you want the light. Without obstacles, the Bluetooth range is 25 m (82 ft).
  5. Open the Luxafor desktop app on your computer.
  6. Plug the dongle into the computer you want to control the Dot from.
  7. Wait up to 2 minutes for the devices to connect.

Connect to an Android phone #

  1. Download the Luxafor app from Google Play.
  2. Plug the Dot into the Power Bank.
  3. Turn on Bluetooth on your phone.
  4. Open the app and tap Connect.
  5. Choose the closest Luxafor Dot from the list.
  6. Wait for the devices to connect.

What the lights mean #

Light Meaning
Power Bank light blinks red The Power Bank is charging
Power Bank light is solid red The Power Bank is full
Dot blinks red every 2 seconds Waiting for the dongle to connect
Dongle blinks every 5 seconds in the color you set in the app Waiting for the Dot to connect

Use the Luxafor desktop app #

Choose a mode #

Open General in the app to choose a mode. Each mode takes control of the Dot, so only one mode can be active at a time. Notifications and Settings (hotkeys) work at the same time as the active mode.

Solid Color mode #

Choose a preset color, such as red for busy and green for available. For your own color meanings, use Custom Color and move the slider to pick from 16 million colors. Solid Color mode works on Windows and Mac.

Timer mode #

Use the timer to plan your day. Set the times when you cannot be disturbed and when you are available.

  1. Click Add new timer.
  2. Enter the times.
  3. Choose a color. The Dot changes color at those times.

Timer mode works on Windows and Mac.

Pomodoro mode #

Set the length of your Pomodoro sessions and breaks to fit your work pace. The Dot blinks in a pattern you choose when a session starts. It turns red during a session, so people know not to disturb you. It turns green during a break. You can start, pause or reset a session. Pomodoro mode works on Windows and Mac.

Webhook mode #

Webhook mode lets you build your own solutions and control other devices with the Luxafor Web API. Read the Webhook API basics. Webhook mode works on Windows and Mac.

Microsoft Teams mode #

The Dot shows your Teams status. Follow the steps in Microsoft Teams mode. Teams mode works on Windows and Mac.

Zapier mode #

Zapier mode connects the Dot to many other apps. Each action can be Play Pattern, Solid Color or Blink Color. Choose a color or pattern for each action.

  1. Copy your Luxafor ID from the Zapier tab.
  2. Paste it into your zap on Zapier.
  3. Test the connection on Zapier.

For more steps, read Luxafor integration to Zapier. Zapier mode works on Windows and Mac.

Cisco Jabber mode #

The Dot changes color with your Jabber presence status and blinks red during a call. Follow the steps in Cisco Jabber integration. Jabber mode works on Windows.

Email notifications #

Open Notifications in the app to make the Dot blink when an email arrives. You can choose to blink:

  • while any email is unread in your inbox
  • only when a new email arrives
  • only for emails that contain certain words. For example, use the word “order” to keep up with your sales.

To connect your email, choose Gmail if you have a Gmail account, or Mail for any other email. Fill in the fields in the window that opens. Email notifications work on Windows and Mac.

Hotkeys #

Hotkeys change the color without opening the app, so you stay on your task. Define them in Settings in the app. Type the shortcut you want to use, and the light changes to the color you set. Hotkeys work on Windows and Mac.

Battery life #

Battery life depends on the colors, the LED brightness and how often you use the Dot. When you do not use the Dot, unplug it from the Power Bank. This gives you the longest battery life from one charge.

Use Battery life
Patterns only 1300 hours
Red, green or blue at lowest brightness 163 hours
Mixed colors (yellow, cyan, magenta) at lowest brightness 145 hours
Red, green or blue at maximum brightness 45 hours
Mixed colors (yellow, cyan, magenta) at maximum brightness 25 hours

The hours are for continuous use.

Compatibility #

You can use the Luxafor Bluetooth with a computer or phone that runs one of these systems.

  • Windows: Windows 7, 8, 8.1, 10 and 11
  • Mac: Mountain Lion, Mavericks, Yosemite, El Capitan, Sierra, Mojave, Catalina, Big Sur and Monterey
  • Android: Android 5.0 and newer

Technical specifications #

Dot with Power Bank #

Specification Value
Dimensions 124 × 24 × 23 mm (4.88 × 0.94 × 0.90 in)
Weight 70 g
Light 2 RGB LEDs
Power consumption Up to 80 mA
Range 25 m (82 ft) without obstacles
Battery Built-in, 2600 mAh, in the Power Bank
Battery life 25 hours to 6 months, depending on brightness and mode. See Battery life.
Charging Micro USB data cable, 3 to 5 hours
Power for the Dot From the Power Bank

Dongle #

Specification Value
Dimensions 42 × 18 × 8 mm (1.65 × 0.70 × 0.31 in)
Weight 8 g
Light 2 RGB LEDs
Power USB powered
Power consumption Up to 80 mA

Troubleshooting #

For more help, read Luxafor Bluetooth Troubleshooting.

Nothing happens when I plug in the dongle #

  1. Plug the Dot into the Power Bank first, and the dongle into the computer or hub after.
  2. Wait up to 2 minutes. The devices need this time to connect.
  3. Install the latest Luxafor desktop app from the Luxafor software page.
  4. Use the dongle from the box.
  5. Plug a keyboard or a memory stick into the same USB port. If it does not work, the port has a problem.
  6. Plug the dongle into other USB ports on your computer or hub.
  7. Plug the dongle into another computer with the same operating system and version.
  8. Charge the Power Bank fully. See Charge the Power Bank.
  9. Keep the Dot and the dongle within 25 m (82 ft) of each other. Remove thick concrete walls and large metal objects between them. They can block the signal.
  10. Open the tab for the mode you want in the Luxafor desktop app. For example, to show your Zapier status, open the Zapier tab.
  11. Test the Dot with the Android app. See Connect to an Android phone.

The Dot does not work after a cold start #

  1. In the Luxafor desktop app, open Settings and turn on Start Luxafor when I start Windows. On a Mac, the setting is in the same place.
  2. Charge the Power Bank fully.
  3. On Windows, make sure the USB ports do not go to sleep. Open Device Manager and click the + next to Universal Serial Bus controllers. Click a Root Hub and select Properties. Open the Power Management tab and turn on Allow the computer to turn off this device to save power. Do this for each Root Hub.
  4. In the Control Panel, open Power Options, go to the Hibernation tab and turn off Enable hibernate support.

Gmail notifications do not work #

Use these steps if Gmail notifications fail on Windows, or if a pop-up asks you to log in to Gmail again.

  1. Turn on IMAP in Gmail. Read how to turn on IMAP.
  2. If you use two-step verification, make an app password. Use this password in the Luxafor settings, not your Gmail password. Read how to make an app password.
  3. In the Luxafor desktop app, open Notifications and click Mail.
  4. Fill in the fields as shown below. Click Test Connection to check, then click OK.
    Mail settings window with IMAP server imap.gmail.com, port 993 and Use SSL turned on

Still need help? #

Send us a message and tell us:

  • which device you have and where you bought it
  • what you see, and what you expected to see
  • which steps on this page you have already tried
  • your operating system and Luxafor app version, if it is a software problem
  • your order number, if you have one

A short video or photo of the problem helps us fix it faster. If the problem is with the connection, film the device at the moment it tries to connect.

Updated on 16/11/2026

What are your feelings

  • Happy
  • Normal
  • Sad