View Categories

Luxafor Cube manual

The Luxafor Cube is a wireless busy light with a built-in battery. You change the color by turning the Cube onto a different side, so you do not need a computer or an app. This manual covers charging, setup, turning off, Eco Mode, the battery indicator and specifications.

Luxafor Cube glowing green

What’s in the box #

Luxafor Cube, USB charging cable and magnet

  • 1 Luxafor Cube
  • 1 USB charging cable
  • 1 magnet with double-sided tape

Charge the Cube #

  1. Plug the USB charging cable into a USB charger.
  2. Plug the other end into the micro USB port on the Cube.

The Cube turns on as soon as charging starts. You can use it while it charges, and it works as usual. If the battery is very low, the Cube may not turn on right away. It charges for a short time first, then turns on and works as usual.

Set up #

  1. Charge the Cube fully.
  2. Choose where to put the Cube. You can put it on a desk, or use the magnet to hold it on a wall or other surface. To use the magnet, peel the plastic off the double-sided tape and stick the magnet on a smooth, clean surface.
  3. Press the button on the back of the Cube once, briefly, to turn it on.
  4. Turn the Cube onto a different side to change the color.

Four Luxafor Cubes in green, red, yellow and blue, each turned to a different side

Turn the Cube off #

Press and hold the button on the back. Release it when the Cube turns purple.

If your Cube has a version number that starts with 04, press the small button on the back once, briefly. You find the version number on the carton, next to the bar code.

Sleep Mode #

When you lay the Cube face up, it does not turn off. It goes into Sleep Mode. It is ready to use again as soon as you stand it upright.

Eco Mode #

Eco Mode makes the battery last longer. The Cube shows colors that pulse slowly instead of solid colors.

  1. Press and hold the button on the back.
  2. Release it when the Cube turns orange.

Do the same to turn Eco Mode off. Without Eco Mode, the Cube shows solid colors.

What the colors mean when you hold the button #

Color What to do Result
Purple Release the button The Cube turns off
Orange Release the button Eco Mode turns on or off

Check the battery level #

Lay the Cube face up. It shows a cyan blue color, and the number of LEDs that shine tells you how much battery is left.

Luxafor Cube from the front with the six LEDs numbered 1 to 6 clockwise

  • All 6 LEDs shine: the battery is full.
  • As the battery drains, the LEDs go out one by one. They start with LED 1 and go clockwise.
  • Only LED 6 shines: the battery is almost empty. Charge the Cube right away.

Battery life #

Battery life depends on the color. Yellow uses the most power. The hours are for non-stop use.

Color Normal mode Eco Mode
Yellow 46 hours 58 hours
Green, red or blue 73 hours 90 hours

On average, one charge lasts about 66 hours.

Technical specifications #

Dimensions 52 × 52 × 27 mm (2.05 × 2.05 × 1.06 in)
Weight 56 g
Light 6 RGB LEDs
Power consumption Up to 26 mA
Battery Built-in, 1200 mAh
Battery life 46 to 90 hours of non-stop use. See Battery life.
Charging Micro USB data cable (included)

Still need help? #

Send us a message and tell us:

  • which device you have and where you bought it
  • the version number on the carton, if you can see it
  • what you see, and what you expected to see
  • which steps on this page you have already tried
  • your order number, if you have one

A short video or photo of the problem helps us fix it faster.

Updated on 16/11/2026

What are your feelings

  • Happy
  • Normal
  • Sad