View Categories

Luxafor Colorblind Flag manual

The Luxafor Colorblind Flag is a small busy light that gets its power from your computer over USB. You show your status with the light on, off or blinking. A magnet holds it on your laptop, a cubicle partition or another surface. This manual covers setup, the Luxafor desktop app and troubleshooting.

Luxafor Colorblind Flag with a stop sign on its flag, side view

What’s in the box #

Luxafor Colorblind Flag, magnet and USB data cable

  • 1 Luxafor Colorblind Flag
  • 1 USB data cable, 0.5 m (20 in) or 1.5 m (60 in)
  • 1 magnet with double-sided tape

Set up #

  1. Download the Luxafor desktop app for your computer from the Luxafor software page. Install the latest version.
  2. Remove the plastic from the double-sided tape on the magnet.
  3. Stick the magnet on the surface where you want the Flag, for example your laptop or a cubicle partition. You can remove the magnet at any time. It leaves no residue.
  4. Open the Luxafor desktop app on your computer.
  5. Connect the Flag to your computer with the USB cable from the box. Use only this cable. The Flag does not work with other cables.

Use the Luxafor desktop app #

Choose a mode #

Open General in the app to choose a mode. Each mode takes control of the Flag, so only one mode can be active at a time. Notifications and Settings (hotkeys) work at the same time as the active mode.

Colorblind mode #

Luxafor app Colorblind mode with Off and On buttons, preview patterns and a brightness slider
Choose On for busy, Off for available, or a blinking pattern for custom notifications. Use the slider to change the brightness. Colorblind mode works on Windows and Mac.

Timer mode #

Use the timer to plan your day. Set the times when you cannot be disturbed and when you are available.

  1. Click Add new timer.
  2. Enter the times.
  3. Choose any color for On (busy). Choose Off for available.

Timer mode works on Windows and Mac.

Zapier mode #

Each action can be Play Pattern, Solid Color (on) or Blink Color. Choose a mode for each action.

  1. Copy your Luxafor ID from the Zapier tab.
  2. Paste it into your zap on Zapier.
  3. Test the connection on Zapier.

For more steps, read Luxafor integration to Zapier. Zapier mode works on Windows and Mac.

Webhook mode #

Webhook mode lets you build your own solutions and control other devices with the Luxafor Web API. Read the Webhook API basics. Webhook mode works on Windows and Mac.

Email notifications #

The Flag can blink when you get email. Open Notifications in the app. Works on Windows and Mac.

  1. Click Gmail if you have a Gmail account. Click Mail for any other email account.
  2. Fill in the fields in the pop-up window.
  3. Choose when the Flag blinks: while there is an unread email in your inbox, or only when a new email arrives.
  4. To get alerts only for certain emails, set a keyword. For example, use the word order to see only sales emails.

Hotkeys #

Hotkeys turn the Flag on or off without opening the app, so you stay on your task. Define them in Settings in the app. Type the shortcut you want to use, and the light changes the way you set it. Hotkeys work on Windows and Mac.

Compatibility #

You can use the Colorblind Flag with a computer that runs one of these systems.

  • Windows: Windows 7, 8, 8.1, 10 and 11
  • Mac: Mountain Lion, Mavericks, Yosemite, El Capitan, Sierra, Mojave, Catalina, Big Sur and Monterey

Technical specifications #

Specification Value
Dimensions 48 × 15 × 34 mm (1.88 × 0.59 × 1.33 in)
Weight 8 g
Light 6 RGB LEDs
Power USB powered, through the USB data cable from the box
Power consumption Up to 0.5 W

Troubleshooting #

For more help, read Luxafor Flag troubleshooting.

Nothing happens when I plug in the Flag #

  1. Use the USB cable from the box.
  2. Plug a keyboard or a mouse into the same USB port. If it does not work, the port has a problem.
  3. Plug the Flag into other USB ports on your computer or hub.
  4. Plug the Flag into another computer with the same operating system and version.
  5. Install the latest Luxafor desktop app from the Luxafor software page.
  6. Open the tab for the mode you want in the Luxafor desktop app. For example, to show your Zapier status, open the Zapier tab.

The Flag does not work after a cold start #

  1. In the Luxafor desktop app, open Settings and turn on Start Luxafor when I start Windows.
  2. On Windows, make sure the USB ports do not go to sleep. Open Device Manager and click the + next to Universal Serial Bus controllers. Click a Root Hub and select Properties. Open the Power Management tab and turn on Allow the computer to turn off this device to save power. Do this for each Root Hub.
  3. In the Control Panel, open Power Options, go to the Hibernation tab and turn off Enable hibernate support.

Gmail notifications do not work #

Use these steps if Gmail notifications fail on Windows, or if a pop-up asks you to log in to Gmail again.

  1. Turn on IMAP in Gmail. Read how to turn on IMAP.
  2. If you use two-step verification, make an app password. Use this password in the Luxafor settings, not your Gmail password. Read how to make an app password.
  3. In the Luxafor desktop app, open Notifications and click Mail.
  4. Fill in the fields as shown below. Click Test Connection to check, then click OK.Mail settings window with IMAP server imap.gmail.com, port 993 and Use SSL turned on

Still need help? #

Send us a message and tell us:

  • which device you have and where you bought it
  • what you see, and what you expected to see
  • which steps on this page you have already tried
  • your operating system and Luxafor app version, if it is a software problem
  • your order number, if you have one

A short video or photo of the problem helps us fix it faster.

Updated on 16/11/2026

What are your feelings

  • Happy
  • Normal
  • Sad